3Com 3CRUS2475 - Gvrp Commands; Gvrp Enable (Global)

32
GVRP COMMANDS
gvrp enable
(Global)
GARP VLAN Registration Protocol (GVRP) is an industry-standard protocol
designed to propagate VLAN information from device to device. With
GVRP, a single device is manually configured with all desired VLANs for
the network, and all other devices on the network learn these VLANs
dynamically.
The gvrp enable Global Configuration mode command enables GVRP
globally. To disable GVRP on the device, use the no form of this
command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables GVRP globally on the device.
Console(config)# gvrp enable