3Com 3CRUS2475 - User Interface Commands; Disable; Login

436 CHAPTER 31: USER INTERFACE COMMANDS
disable The disable Privileged EXEC mode command returns to the User EXEC
mode.
Syntax
disable [privilege-level]
Parameters
■ privilege-level — Privilege level to enter the system. (Range: 1-15)
Default Configuration
The default privilege level is 1.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example return to Users EXEC mode.
login The login User EXEC mode command changes a login username.
Syntax
login
Default Configuration
This command has no default configuration.
Command Mode
Console# disable
Console>