3Com 3CRUS2475 - Show Interfaces Access-Lists

52 CHAPTER 3: ACL COMMANDS
Example
The following example displays access lists defined on a device.
show interfaces
access-lists
The show interfaces access-lists Privileged EXEC mode command
displays access lists applied on interfaces.
Syntax
show interfaces access-lists [ethernet interface | port-channel
port-channel-number]
Parameters
■ interface — Valid Ethernet port.
■ port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show access-lists
IP access list ACL1
permit ip host 172.30.40.1 any
permit rsvp host 172.30.8.8 any