3Com 3CRUS2475 - Antenna

antenna 499
Command Mode
AP Interface Radio Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the RTS threshold to 2300 bytes.
antenna The antenna AP Interface Radio Configuration mode command
configures an antenna for the transceiver. To restore defaults, use the no
form of this command.
Syntax
antenna {diversity | 1 | 2}
no antenna
Parameters
■ diversity — Specifies the antenna with the best signal.
■ 1 — Specifies antenna number 1.
■ 2 — Specifies antenna number 2.
Default Configuration
Diversity
Command Mode
AP Interface Radio Configuration mode
User Guidelines
There are no user guidelines for this command.
Console (Config-wlan-ap)# interface radio 802.11g
Console (Config-wlan-ap-radio)# rts threshold 2300