3Com 3CRUS2475 - Show Wlan Ap Interface Ethernet

show wlan ap interface ethernet 365
Example
The following example displays information on an AP radio interface.
show wlan ap
interface ethernet
The show wlan ap interface ethernet Privileged EXEC mode command
displays information on an AP radio interface.
Syntax
show wlan ap {name | mac-address} interface ethernet
Parameters
■ name — The AP name.
■ mac-address — The AP MAC address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console # show wlan ap AP1 interface radio g
State: Enabled
Allow traffic: Enabled
Channel: Least Congested (11).
Power: Maximum
Allow 802.11b: Enabled
Preamble: Long
RTS Threshold: 2312 bytes
Antenna: Diversity
Beacon Period: 100 ms
SSID BSSID Advertise Data Rates
------ -------- -------------- ----------------
Enterprise Enabled Enabled
6(m), 9, 12, 18, 24, 36, 48, 54
Guest Enabled Enabled
1(m), 2, 5.5, 6, 9, 11, 12, 18, 24