show vlan 465
All VLANs are allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command can be used to prevent GVRP from automatically making
the specified VLANs active on the selected ports.
Example
The following example forbids adding VLAN IDs 234 to 256 to Ethernet
port 1.
show vlan The show vlan Privileged EXEC mode command displays VLAN
information.
Syntax
show vlan [id vlan-id | name vlan-name]
Parameters
■ vlan-id — specifies a VLAN ID
■ vlan-name — Specifies a VLAN name string. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console(config)# interface ethernet 1
Console(config-if)#
switchport mode trunk
Console(config-if)# switchport forbidden vlan add 234-256
To Next Page
Loading...
