3Com 3CRUS2475 - Show Crypto Certificate Mycertificate

show crypto certificate mycertificate 391
Parameters
■ number — Specifies the certificate number. (Range: 1-2)
Default Configuration
There is no default configuration for this command.
Command Mode
Global Configuration mode
User Guidelines
The crypto certificate generate command should be used to generate
HTTPS certificates.
Example
The following example configures the active certificate for HTTPS.
show crypto
certificate
mycertificate
The show crypto certificate mycertificate Privileged EXEC mode
command displays the SSH certificates of the device.
Syntax
show crypto certificate mycertificate [number]
Parameters
■ number — Specifies the certificate number. (Range: 1-2)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
Console(config)# ip https certificate 1