3Com 3CRUS2475 - Show Management Access-Class

322 CHAPTER 21: MANAGEMENT ACL COMMANDS
There are no user guidelines for this command.
Example
The following example displays the ‘mlist’ management access list.
show management
access-class
The show management access-class Privileged EXEC mode command
displays the active management access list.
Syntax
show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active
management access list.
Console# show management access-list mlist
mlist
-----
permit ethernet g1
permit ethernet g2
! (Note: all other access implicitly denied)
Console# show management access-class
Management access-class is enabled, using access list mlist