26 CHAPTER 1: USING THE CLI
The ports may be described on an individual basis or within a range. Use
format port number-port number to specify a set of consecutive ports
and port number, port number to indicates a set of non-consecutive
ports. For example, g1-3 stands for Gigabit Ethernet ports 1, 2 and 3, and
g1,5 stands for Gigabit Ethernet ports 1 and 5.
Keyboard Shortcuts
The CLI has a range of keyboard shortcuts to assist in editing the CLI
commands. The following table describes the CLI shortcuts.
Table 3: Keyboard Key Table 4: Description
Up-arrow key Recalls commands from the history
buffer, beginning with the most recent
command. Repeat the key sequence to
recall successively older commands.
Down-arrow key Returns the most recent commands
from the history buffer after recalling
commands with the up arrow key.
Repeating the key sequence will recall
successively more recent commands.
Ctrl+A Moves the cursor to the beginning of
the command line.
Ctrl+E Moves the cursor to the end of the
command line.
Ctrl+Z / End Returns back to the Privileged EXEC
mode from any configuration mode.
Backspace key Deletes one character left to the cursor
position.
To Next Page
Loading...
