snmp-server user 287
Default Configuration
No group entry exists.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example attaches a group called user-group to SNMPv3
and assigns to the group the privacy security level and read access rights
to a view called user-view.
snmp-server user The snmp-server user Global Configuration mode command configures
a new SNMP Version 3 user. To remove a user, use the no form of this
command.
Syntax
snmp-server user username groupname [remote engineid-string] [
auth-md5 password | auth-sha password | auth-md5-key
md5-des-keys | auth-sha-key sha-des-keys]
no snmp-server user username [remote engineid-string]
Parameters
■ username — Specifies the name of the user on the host that connects
to the agent. (Range: 1-30 characters)
■ groupname — Specifies the name of the group to which the user
belongs. (Range: 1-30 characters)
■ engineid-string — Specifies the engine ID of the remote SNMP entity
to which the user belongs. The engine ID is a concatenated
hexadecimal string. Each byte in the hexadecimal character string is
two hexadecimal digits. Each byte can be separated by a period or
colon. (Range: 5-32 characters)
Console(config)#
snmp-server group
user-group
v3 priv read
user-view
To Next Page
Loading...
