3Com 3CRUS2475 - Show Wlan Auto-Tx-Power

510 CHAPTER 36: WIRELESS WLAN COMMANDS
Example
The following example specifies the WLAN information for user called
‘Device’.
show wlan
auto-tx-power
The show wlan auto-tx-power Privileged EXEC mode command
displays information on the WLAN automatic power transmission
configuration.
Syntax
show wlan auto-tx-power
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
console# show wlan aps Device
NAME: Device
MAC Address: 00:f0:00:00:06:25
Type: a, g
State: Active
802.11a Radio: Enabled
802.11g Radio: Enabled
VLANs Allowed: 2, 3, 4, 5, 66, 77, 88, 99, 221, 224, 226, 666,
1000
Native VLAN: 1
Tunnel Source State: Enabled
Tunnel Priority: 39
IP Address: 1.1.1.11
DNS Name:
WAN Timing Constraints: Enabled
Console Logging: Enabled
console#