152 CHAPTER 10: CLOCK COMMANDS
clock summer-time date month date year hh:mm month date year
hh:mm [offset offset] [zone acronym]
no clock summer-time recurring
Parameters
■ recurring — Indicates that summer time should start and end on the
corresponding specified days every year.
■ date — Indicates that summer time should start on the first specific
date listed in the command and end on the second specific date in the
command.
■ usa — The summer time rules are the United States rules.
■ eu — The summer time rules are the European Union rules.
■ week — Week of the month. (Range: 1-5, first, last)
■ day — Day of the week (Range: first three letters by name, like sun)
■ date — Date of the month. (Range:1-31)
■ month — Month. (Range: first three letters by name, like Jan)
■ year — year - no abbreviation (Range: 2000-2097)
■ hh:mm — Time in military format, in hours and minutes. (Range: hh:
0-23, mm:0-59)
■ offset — Number of minutes to add during summer time. (Range:
1-1440)
■ acronym — The acronym of the time zone to be displayed when
summer time is in effect. (Range: Up to 4 characters)
Default Configuration
Summer time is disabled.
offset — Default is 60 minutes.
acronym — If unspecified default to the timezone acronym.
If the timezone has not been defined, the default is UTC.
Command Mode
Global Configuration mode
To Next Page
Loading...
