show power inline 207
Usage
Threshold
The usage threshold expressed in percents for comparing the
measured power and initiating an alarm if threshold is
exceeded.
Traps Indicates if inline power traps are enabled.
Port The Ethernet port number.
Powered device A description of the powered device type.
Admin State Indicates if the port is enabled to provide power. Admin State
can be Auto or Never.
Priority The priority of the port from the point of view of inline power
management. Priority can be Critical, High or Low.
Oper State Describes the inline power operational state of the port. Oper
State can be On, Off, Test-Fail, Testing, Searching or Fault.
Classification Power consumption classification of the powered device.
Overload
Counter
Counts the number of overload conditions that has been
detected.
Short Counter Counts the number of short conditions that has been detected.
Denied Counter Counts the number of times power has been denied.
Absent Counter Counts the number of times power has been removed because
powered device dropout was detected.
Invalid
Signature
Counter
Counts the number of times an invalid signature of a powered
device was detected.
Field Description
To Next Page
Loading...
