362 CHAPTER 24: WIRELESS AP GENERAL COMMANDS
The following example displays detailed information on a specific active
AP:
The following example displays important radio information on all the
active APs.
Console # show wlan aps AP1
Name: AP1
MAC Address: 00-9E-92-4C-73-FC
Type: a, g
State: Enabled
Status: Disabled
802.11a Radio: Enabled
802.11g Radio: Enabled
VLANs Allowed: 2, 3
Native VLAN: 2
Tunnel Priority: 20
IP address: 172.16.1.1
DNS name: wlan-switch1.ge.com
WAN Timing Constrains: Disabled
Console Logging: Disabled
Console # show wlan aps radio
Name Radio State Power Channel Traffic
Oper
Allow
Admin
------- -------
-
-------
-
-------
-
-------
----
-------
-------
-------
-------
-------
-------
AP1
a
Enabled Maximum LG Enabled
N/A
AP1
g
Enabled Maximum LG Enabled Enabled
AP2
a
Enabled Maximum
44
Enabled N/A
AP2
g
Enabled Maximum
11
Enabled Enabled
To Next Page
Loading...
