42 CHAPTER 3: ACL COMMANDS
Syntax
permit {any | protocol} {any | {source source-wildcard}} {any |
{destination destination-wildcard}} [dscp dscp number | ip-precedence
ip-precedence]
permit-icmp {any | {source source-wildcard}} {any | {destination
destination-wildcard}} {any | icmp-type} {any | icmp-code} [dscp number |
ip-precedence number]
permit-igmp {any | {source source-wildcard}} {any | {destination
destination-wildcard}} {any | igmp-type} [dscp number | ip-precedence
number]
permit-tcp {any | {source source-wildcard}} {any | source-port} {any
|{destination destination-wildcard}} {any | destination-port} [dscp number
| ip-precedence number] [flags list-of-flags]
permit-udp {any | {source source-wildcard}} {any | source-port} {any |
{destination destination-wildcard}} {any | destination-port} [dscp number
| ip-precedence number]
Parameters
■ source — Specifies the source IP address of the packet. Specify any to
indicate IP address 0.0.0.0 and mask 255.255.255.255.
■ source-wildcard — Specifies wildcard to be applied to the source IP
address. Use 1s in bit positions to be ignored. Specify any to indicate
IP address 0.0.0.0 and mask 255.255.255.255.
■ destination — Specifies the destination IP address of the packet.
Specify any to indicate IP address 0.0.0.0 and mask 255.255.255.255.
■ destination-wildcard — Specifies wildcard to be applied to the
destination IP address. Use 1s in bit positions to be ignored. Specify
any to indicate IP address 0.0.0.0 and mask 255.255.255.255.
■ protocol — Specifies the abbreviated name or number of an IP
protocol. (Range: 0-255)
To Next Page
Loading...
