3Com 3CRUS2475 - Page 495

channel 495
Syntax
channel {number | frequency | least-congested}
no channel
Parameters
■ number — Specifies a channel number. The ranges are as follows:
■ 802.11g — 1 – 14.
■ 802.11a — 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64, 149, 153, 157,
161.
■ frequency — Specifies the center frequency for the radio channel. The
ranges are as follows:
■ 802.11g — 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452,
2457, 2462, 2467, 2472, 2484.
■ 802.11a — 5170, 5180, 5190, 5200, 5210, 5220, 5230, 5240, 5260,
5280, 5300, 5320, 5745, 5765, 5785, 5805.
■ least-congested — Enables or disables the scanning for a least busy
radio channel.
Default Configuration
Least congested channel.
Command Mode
AP Interface Radio Configuration mode
User Guidelines
The valid frequencies depend on the country code that was set by the
wlan country-code Global Configuration command.
Example
The following example configures the RF channel to a 802.11g frequency
of 2437
Console (Config-wlan-ap)# interface radio 802.11g
Console (Config-wlan-ap-radio)# channel 802.11g 2437