EasyManua.ls Logo

3Com 3CRUS2475 - Defining Multiple Hosts

3Com 3CRUS2475
522 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
bridge multicast forbidden forward-all 61
Syntax
bridge multicast forbidden forward-all {add | remove} {ethernet
interface-list | port-channel port-channel-number-list}
no bridge multicast forbidden forward-all
Parameters
add — Forbids forwarding all multicast packets.
remove — Does not forbid forwarding all multicast packets.
interface-list — Separates nonconsecutive Ethernet ports with a
comma and no spaces; a hyphen is used to designate a range of ports.
port-channel-number-list — Separates nonconsecutive port-channels
with a comma and no spaces; a hyphen is used to designate a range
of port-channels.
Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
IGMP snooping dynamically discovers multicast device ports. When a
multicast device port is discovered, all the multicast packets are
forwarded to it unconditionally.
This command prevents a port from becoming a multicast device port.
Example
In this example, forwarding all multicast packets to g1 with VLAN 2 is
forbidden.
Console(config)#
interface vlan
2
Console(config-if)#
bridge multicast forbidden forward-all
add ethernet g
1

Table of Contents

Other manuals for 3Com 3CRUS2475

Related product manuals