86 CHAPTER 5: ETHERNET CONFIGURATION COMMANDS
Syntax
show interfaces advertise [ethernet interface | port-channel
port-channel-number]
Parameters
■ interface — Valid Ethernet port.Elana
■ port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays auto-negotiation information.
Console#
show interfaces advertise
Port Type Neg Operational
Link
Advertisement
---- ----------- ------- --------------
--------------
--
1 100M-Copper Enabled --
2 100M-Copper Enabled --
3 100M-Copper Enabled --
4 100M-Copper Enabled --
5 100M-Copper Enabled 100f, 100h,
10f, 10h
6 100M-Copper Enabled --
7 100M-Copper Enabled --
To Next Page
Loading...
