98 CHAPTER 5: ETHERNET CONFIGURATION COMMANDS
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
Console#
show ports storm-control
Port State Rate
[Kbits/Sec]
Included
---- ----- --------------
--
--------
g1 Disabled 3500 Broadcast
g2 Disabled 3500 Broadcast
g3 Disabled 3500 Broadcast
g4 Disabled 3500 Broadcast
g5 Disabled 3500 Broadcast
g6 Disabled 3500 Broadcast
To Next Page
Loading...
