Routing elements
126
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Linking a Direct Dial Number with a Call Distribution Element
Direct dial numbers are created as blocks with 1 to several numbers. When the
number range is created each direct dial number is automatically linked with a call
distribution element. A call distribution element can also be subsequently allo-
cated to several numbers.
1. When direct dial numbers are created, call distribution elements are assigned automatically
2. Several direct dial numbers can be allocated to one call distribution element.
3. For performance reasons unused call distribution elements should be deleted.
Fig. 51 Linking direct dial numbers with call distribution elements
Destinations can be allocated to the linked call distribution elements as soon as
they are created. Various options can be selected using the setting Link matching
users (Tab. 33).
Tab. 33 Allocating CDE destinations using the setting Link matching users
The system only provides direct dialling plans for digital network interfaces.
Parameter value Result
No A common CDE destination can be allocated to all the DDI numbers of the
new block, depending on the switching position of a switch group. Default:
UG 16
yes,
do not create non-matching
A DDI number will only be created if an internal user with the same number
already exists. The user will be allocated as the CDE destination for all the
switch positions of a switch group.
yes,
create non-matching also
All the DDI numbers of the new block will be created. If internal users with the
same numbers exist they will be allocated as call distribution destination. A
common CDE destination can be allocated to all the other DDI numbers,
depending on the switching position of a switch group. Default: UG 16
To Next Page
Loading...
Need help?
General
