Call routing
185
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Routing with Direct Dialling
Fig. 79 Routing a call from the public network with direct dialling
Tab. 41 Setting the routing parameters
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
• Protocol DSS1
• Overwrite NPI no
• Direct dialling plan 1 (number of a direct dialling plan)
• Call Distribution Element 1 (significant only if a suitable direct dial number is not found)
Direct dialling plan 1:
• Direct dialling number 20 2 (reference number of a call distribution element)
Call distribution element 2:
• Destinations Switch position 1: User 220 + KT
• Incoming connections Number of connections allowed simultaneously
To Next Page
Loading...
