Call routing
186
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Routing without Direct Dialling
A call without a suitable direct dial number is routed to the call destination via the
call distribution element allocated in the trunk group.
[1] One and the same trunk group cannot contain both analogue and digital network interfaces.
Fig. 80 Routing a call from the public network without direct dialling
Tab. 42 Setting the routing parameters
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
1)
1)
Not relevant for trunk groups with analogue network interfaces
• Protocol DSS1
1)
• Overwrite NPI no
1)
• Direct dialling plan 1 (relevant only if a suitable DD number is found)
• Call Distribution Element 1 (reference number of a call distribution element)
Call distribution element 1:
• Destinations Switch position 1: User 220 + KT
• Incoming connections Number of connections allowed simultaneously
To Next Page
Loading...
