Call routing
188
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Routing with Direct Dialling
A call with a suitable number in the direct dialling plan is routed to the destination
via the call distribution element allocated there.
If the first few digits of the phone number match the number entered under Own
regional prefix in the numbering plan, they will be truncated before the search for a
suitable direct dial number is carried out.
Fig. 81 Routing a call from the private leased-line network with direct dialling
Tab. 44 Setting the routing parameters
Parameter Parameter value
Trunk group 2:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
• Overwrite NPI no
• Direct dialling plan 2 (number of a direct dialling plan)
• Call Distribution Element Not relevant to this case
Direct dialling plan 2:
• Direct dialling number 20 3 (reference number of a call distribution element)
To Next Page
Loading...
