Call routing
189
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Direct Routing
A call without direct dialling is routed directly to a destination of the internal num-
bering plan.
Fig. 82 Routing a call from the private leased-line network without direct dialling
Tab. 45 Setting the routing parameters
Call distribution element 3:
• Destinations Switch position 1: User 220 + KT
• Incoming connections Number of connections allowed simultaneously
Parameter Parameter value
Trunk group 2:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
• Overwrite NPI no
• Direct dialling plan 2 (if a suitable DD number is found) or
• Call Distribution Element Not relevant to this case
Parameter Parameter value
To Next Page
Loading...
