Call routing
263
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
The exchange access prefix is set under Send access code in the route configuration
of the source PINX.
[1] One and the same trunk group cannot contain both analogue and digital network interfaces.
Fig. 114 Transit routing for private leased-line network → public network with exchange access prefix
Tab. 88 Settings for PINX 2 routing parameters
PINX 1 routing parameters as in Tab. 87.
Parameter Parameter value
Route 1:
• Trunk groups 1 (reference number of one or more trunk group(s))
• Numbering plan identifier NPI Unknown
• Type of number TON Unknown
• Send access code 170
Trunk group 1:
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol PSS1 (QSIG)
To Next Page
Loading...
