Data service
285
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
System configuration
Tab. 97 Setting up the fax server
Parameter Explanation
Fax server settings (CM_5.17)
IP address and port
(display only)
The fax service IP address is identical to the applications card IP address. The perma-
nently assigned port is port 9060.
Domain name The standard domain name is fax.local. Please do not modify this if possible, after install-
ing the fax client application on the PCs. However, if necessary, you must adapt the reg-
istry as follows on each PC:
• Start the fax client setup, with the following parameter request, whereby you must
replace fax.local with the new domain name: Aastra-Fax-Client-
Setup32.exe /v“REG_ADDREXTFAXPREFIX=\”[SMTP:\”
REG_ADDREXTFAXPOSTFIX=\”@fax.local]\””
• Check the registry input. This should be as follows, with the new domain name in place
of fax.local: HKEY_LOCAL_MACHINE\SOFT-
WARE\Wow6432Node\Ferrari\fomclient\Out-
look\Addin] "AddrExtFaxPostfix"="@fax.local"
Exchange access
prefix
Lets you specify by selecting a prefix how an external outgoing fax message should
access the exchange:
• Enter the usual exchange access prefix according to the numbering plan (country-spe-
cific default value): The prefix is added to the destination number and the routing takes
place via the transit route (in the default setting this is route 1). The user or user appli-
cation dials the destination number without an access prefix and not in canonical for-
mat. Example: Prefix “0” is the default value for most European countries).
• You enter a route prefix: The prefix is added to the destination number and the routing
takes place via the corresponding route. The user or user application dials the destina-
tion number without an access prefix and not in canonical format. Example: Prefix
“173” is the default route selection for route 4.
• You leave the field blank: No prefix is made to precede the destination number. The
user or user application dials the destination number with an access prefix or in canon-
ical format. The routing takes place in accordance with the selected destination
number.
E-mail address for
error messages
Enter here the e-mail address to which the fax server should send error messages.
To Next Page
Loading...
