Features
371
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Detailed Description
Tab. 153 Call Forwarding Unconditional
Note:
The internal number of a call distribution element can only be used as the
destination for a CFU in a special case, namely if at least one CDE destina-
tion is configured on ACD. If not, Not available is displayed whenever the
function is activated. Any configured CDE destinations that are not ACD
are never executed.
Call forwarding chains:
• Internal: CFU chains can be set up locally (maximum 20);
• In the PISN: CFU chains are permitted. They are however restricted by the transit
counter.
Note:
The function code *67 (CFB) and *61 (Call Forwarding on No Reply)
interrupts a chain of call forwarding (*67 or *61 is no longer carried
out).
Call forwarding loops:
• Internal: not permitted.
• In the PISN: restricted by the transit counter.
C is the only user who can still reach B.
Interface Operating sequence / signalling on the terminal Scope
B • Obtains acknowledgement tone when activating
and resetting the CFU
•If CFU first ring = yes is configured and C is an inter-
nal user, B obtains an attention tone (short ring)
and has 5 seconds in which to answer the call.
Restriction:
B can only activate a single Call Forwarding
Unconditional. Each new one overwrites
the old one.
C Possible destinations:
• Users: internal, external
1)
, PISN
2)
• Coded ringing
• UG: 17 to 21 (Aastra 415/430) or 25 to 29
(Aastra 470) and user groups configured
as "large".
• Standard text (leave message)
Requirement:
C is not protected against Call Forwarding
Unconditional (*02).
1)
see "Call Forwarding Unconditional to exchange", page 373.
2)
The conditions for Call Forwarding Unconditional to exchange apply to PISN users in the public network or
on a virtually connected PINX.
To Next Page
Loading...
Need help?
General
