Numbering plan
52
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Cost centre selection The call charges are explicitly
allocated to the selected cost
centre.
13 <CC No.>
<ext. call No.>
Prefix, truncated
together with the
CC No. before dial-
ling out into the
network
Internal users Internal users of the system.
The users are assigned one or
more terminals.
20 to n or
200 to n
2)
–
Route selection Routes the outgoing call via
the selected route
170 to n
3)
<ext. call No.> Prefix, truncated
before dialling out
into the network
User group User groups can be selected
internally, directly with these
numbers
860 to n
3)
–
AMC Controller Internal number of the
AMC Controller.
897 –
Remote maintenance
access PPP
Selects the configuration
interface via PPP
898 –
Voice mail Internal number of the Basic/
Enterprise voice mail system.
To activate a mailbox a call is
rerouted to this number.
899 – Only one voice
mail number can
be created.
Abbreviated dialling Other, user-definable num-
bers are stored under these
numbers
7000 to
7999
–
Door intercom system
4)
Selects the door intercom Not allo-
cated
–
Control output For switching external equip-
ment
Not allo-
cated
–
Call Distribution Ele-
ments
Call distribution elements can
be selected internally, directly
with these numbers
Not allo-
cated
–
PISN users Users on another PINX in the
PISN
Not allo-
cated
–
Own region prefix Level 1 prefix for the region
allocation of a PINX in the PISN
Not allo-
cated
– Prefix, truncated
on detection
* - substitute Substitute digit for pulse dial-
ling phones without *-key
Not allo-
cated
<Function
code>
1)
Default settings for Switzerland
2)
Depends on the number of terminal interfaces installed.
3)
Depends on the type of communication server
4)
Only with Aastra 415/430 and if the corresponding number of ODAB card(s) is fitted
Category Number / Number Range
Name Explanation Number
1)
Number range Explanation
To Next Page
Loading...
Need help?
General
