Features
555
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Phone booth operation, variant 2
Guest user 45 contacts Reception because he wants to make a phone call.
Fig. 244 Signalling on the operator console with variant 2 of phone booth operation
The guest in the phone box picks up the receiver within 2 minutes and obtains a
dial tone. The line is signalled as "busy" on the operator console.
Operating sequence on the operator console:
• Press phone box key (*3245 configured)
• Press Enter key
• Press the End key
When the call in the phone box is completed the charge recall signal rings on the
operator console and the call charge information is displayed in the same way as in
variant 1 (possibly with a delay depending on the configuration).
Phone booth operation, variant 3
User 29, who does not have exchange access authorization, picks up the receiver
and dials the operator’s number (11). He asks for a trunk line and puts down the re-
ceiver.
Fig. 245 Signalling on the operator console with variant 3 of phone booth operation
Operating sequence on the operator console:
• Press function key (*32 configured)
To Next Page
Loading...
