394 Appendix B
Key Definitions
Softkeys displayed by pressing the [Marker] key
DMKR STIMULUS For the selected D marker (D marker, fixed D marker, or tracking D marker), sets
the position in a stimulus value (sweep parameter value).
DMKRPRM <value>
FIXED DMKR VALUE If the fixed D marker is selected, sets the position in the measurement parameter
value (primary measurement parameter value
1
of each trace (A and B) if
COMPLEX Z-Y has been selected as the measurement parameter).
DMKRVAL <value>
FIXED DMKR AUX
VA L U E
If COMPLEX Z-Y has been selected as the measurement parameter, sets the
position in the secondary measurement parameter value
2
of the fixed D marker.
DMKRAUV <value>
return Returns to Table B-58, “Marker (Marker) menu,” on page 392. (N/A)
1. If COMPLEX has been selected as the display format, the value of the real part of each complex parameter (R or G); if POLAR,
the absolute value of each complex parameter (|Z| or |Y|).
2. If COMPLEX has been selected as the display format, the value of the imaginary part of each complex parameter (X or B); if
POLAR, the value of the phase of each complex parameter (q).
Table B-61 Delta marker (Delta MKR) menu
Key operation: [Marker] - DMODE MENU
Softkey Function GPIB command
To Next Page
Loading...
