418 Appendix B
Key Definitions
Softkeys displayed by pressing the [Copy] key
Table B-100 Copy configuration (Copy Setup) menu (2/2)
Key operation: [Copy] - SETUP - more 1/2
Softkey Function GPIB command
LANDSCAPE on OFF Toggles on and off the print mode for using forms in the horizontal orientation
(landscape). If your printer does not support landscape orientation, this setting is
invalid.
LANDSCAPE
{ON|OFF}
FORM FEED ON off Toggles on and off the function (form feed) to automatically feed (eject) forms at
the completion of printing one screen. If the form orientation is landscape (if
landscape is on), this key cannot be pressed (is not displayed).
FORMFEED {ON|OFF}
SOFTKEY on OFF Toggles on and off softkey label print. PRSOFT {ON|OFF}
TIME on OFF Toggles on and off the time stamp function used when outputting to a printer. If
this is set to on, the time and date at the time is printed first, and then the
specified screen information is printed.
COPT {ON|OFF}
more 2/2 Displays Table B-99, “Copy configuration (Copy Setup) menu (1/2),” on page
417.
(N/A)
return Returns to Table B-98, “Copy (Copy) menu,” on page 417. (N/A)
Table B-101 Copy data selection (Copy Contents) menu
Key operation: [Copy] - SELECT CONTENTS
Softkey Function GPIB command
LIST VALUE ä Displays Table B-102, “Copy data (Copy Contents) menu,” on page 419. LISV
OPERATING
PARAMETERS ä
Displays Table B-102, “Copy data (Copy Contents) menu,” on page 419. OPEP
CAL KIT VALUE ä Displays Table B-102, “Copy data (Copy Contents) menu,” on page 419. CALS
COMPEN KIT VALUE
ä
Displays Table B-102, “Copy data (Copy Contents) menu,” on page 419. COMS
LIST SWEEP
SEGMENTS ä
Displays Table B-103, “List sweep segment copy start (Copy Contents) menu,”
on page 419.
DISL
LIMIT TEST
SEGMENTS ä
Displays Table B-104, “Limit test segment copy start (Copy Contents) menu,”
on page 420.
DISLLIST
return Returns to Table B-98, “Copy (Copy) menu,” on page 417. (N/A)
To Next Page
Loading...
Need help?
General
