Agilent Technologies n5181a - Page 226

210 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
SCPI Compatibility
E4428C/38C Compatible Commands
[:SOURce]:POWer:ALC:BANDwidth|BWIDth:AUTO
ON|OFF|1|0
[:SOURce]:POWer:ALC:BANDwidth|BWIDth:AUTO?
✓
[:SOURce]:POWer:ALC:LEVel <value>dB
[:SOURce]:POWer:ALC:LEVel?
✓
[:SOURce]:POWer:ALC:SEARch ON|OFF|1|0|ONCE
[:SOURce]:POWer:ALC:SEARch?
✓
[:SOURce]:POWer:ALC:SEARch:REFerence
FIXed|MODulated
[:SOURce]:POWer:ALC:SEARch:REFerence?
✓
[:SOURce]:POWer:ALC:SEARch:SPAN:POINts <value>
[:SOURce]:POWer:ALC:SEARch:SPAN:POINts?
✓
[:SOURce]:POWer:ALC:SEARch:SPAN:STARt
<value><units>
[:SOURce]:POWer:ALC:SEARch:SPAN:STARt?
✓
[:SOURce]:POWer:ALC:SEARch:SPAN:STOP
<value><units>
[:SOURce]:POWer:ALC:SEARch:SPAN:STOP?
✓
[:SOURce]:POWer:ALC:SEARch:SPAN:TYPE FULL|USER
[:SOURce]:POWer:ALC:SEARch:SPAN:TYPE?
✓
[:SOURce]:POWer:ALC:SEARch:SPAN[:STATe]
ON|OFF|1|0
[:SOURce]:POWer:ALC:SEARch:SPAN[:STATe]?
✓
[:SOURce]:POWer:ALC:SOURce
INTernal|DIODe|MMHead
[:SOURce]:POWer:ALC:SOURce?
✓ Supported but the following parameters are
not supported: DIODe|MMHead
[:SOURce]:POWer:ALC:SOURce:EXTernal:COUPling
(0dB-32dB)
[:SOURce]:POWer:ALC:SOURce:EXTernal:COUPling?
–
Table 6-2 E4428C/38C Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
N51xxA
Remarks