Alcatel OmniPCX Office Technical Documentation

ALCATEL REFLEXES 3G TERMINALS TERMINALS
Ed. 044/8 Réf. 3EH 21000 BSAA
OPTIONAL MODULES (PLUGWARE)
The optional modules are modules which are inserted in the UA link, in series, between a PABX and a
dedicated UA set. They provide an interface for connecting terminals to the system.
Notas : The optional modules can also be used with Reflexes2G sets (the previous generation).
Alcatel Premium and Advanced sets have a slot under the panel for the optional module.
The optional modules available are:
- 4093 ASY-CTI
- 4094 ISW
- 4095 AP
Notas : When the option is used in stand-alone as a TA (Terminal Adapter) interface, you have to
move the red jumper to the other connector position inside the module.
UA
Optional
M
odule
Alcatel UA3G station
UA Link UA Link
Optional port
Alcatel
OmniPCX
Optional
module
UA Link
Optional port
UA
4020 or 4035 station
Alcatel
OmniPCX

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing