EasyManuals Logo

Alcatel OmniPCX Office Technical Documentation

Alcatel OmniPCX Office
964 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #620 background imageLoading...
Page #620 background image
INTERNET ACCESS E-SERVER : INTERNET APPLICATIONS
Ed. 0412/14 Réf. 3EH 21000 BSAA
Connection management
If you wish to configure access to other IAP, you need only re-launch the operation from the Assistants
-> Internet accessmenu. So it is possible to create several connections to various IAP with different
types of connection. These connections (activation, test and deletion) are managed from the Adminis-
tration ->Access providersmenu. The configuration screen gives information on the list of profiles
generated by the system and the active Internet connection.
The Test, Activate and Delete buttons are used to test in succession the connection corresponding to
the active profile, to activate and delete the profile selected from the list of different profiles..
The Modify button (R1.1) is used to modify all the profile parameters of the selected IAP, including
those set by default when creating this profile (see paragraph "Advanced configuration (R1.0)".
Using the Welcome page -> Overall view->Communicationmenu, it is possible to enable or di-
sable the connection and to view the status of the connection to the active IAP as well as the incoming
and outgoing traffic by clicking on connection status.
CLIENT TERMINAL CONFIGURATION
The client terminal needs to be configured in order to use Alcatel OmniPCX Office's shared Internet
Access The changes must be made to the network configuration (TCP/IP configuration ), and to Internet
navigator.
TCP/IP configuration
Alcatel OmniPCX Office is a routing element between LAN and Internet. Alcatel OmniPCX Office needs
to be configured as the default gateway on the client terminal to access the Internet.
Exemple : configuration of a Windows 98 client terminal
- Click on the Network neighbourhoodicon, and choose the Propertiesoption from the con-
text menu.
-In the Network ” window, double-click the “TCP/IP” icon under the “Configuration” tab.
- Enter Alcatel OmniPCX Office's IP address in the New gatewayfield (“Gateway” tab of the
“TCP/IP properties) window).
-Click onAdd” then shut the windows by clickingOK”.
- Re-boot the client terminal to have the changes take effect.
Nota : This configuration is valid only if Alcatel OmniPCX Office is the main router in relation to
the client terminal. In the case of other network configurations, contact the company's sys-
tem administrator.
Configuration of the Internet navigator
The Internet navigator must be configured to take account of the existing LAN.

Table of Contents

Other manuals for Alcatel OmniPCX Office

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel OmniPCX Office and is the answer not in the manual?

Alcatel OmniPCX Office Specifications

General IconGeneral
VoIP SupportYes
SIP SupportYes
ISDN SupportYes
Analog SupportYes
Integrated Voice MailYes
Auto AttendantYes
ConferencingYes
VoIP ProtocolsSIP, H.323
Power Supply100-240 VAC, 50/60 Hz
Network Interfaces10/100 Mbps Ethernet
Humidity10% to 90% non-condensing