Alcatel OmniPCX Office Technical Documentation

SYSTEM MESSAGES MAINTENANCE
Ed. 0416/24 Réf. 3EH 21000 BSAA
175 NMC COMMUNICATION
FAILURE
The PABX received no ack-
nowledgement for the establish-
ment request sent to the NMC
CPU (80)
176 ALARM REPORT FAILURE
The PABX attempted to call the
NMC to send urgent alarms, but
the NMC number was not speci-
fied
CPU (80)
177 PABX NOT SAVED
The PABX attempted to call the
NMC, but the NMC refused the
call because it didn’t recognize
the PABX
CPU (80)
178 UNKNOWN ALARM
There was an alarm on the PABX
but it was not recognized by the
NMC
CPU (80)
190 UNKNOWN IPUI CPU (80) INFO 0, INFO 1, INFO 2, INFO
3 = last 4 bytes of the IPUI
221 ETHERNET LINK OUT OF SERVI-
CE
Board lo-
cation
Ethernet
interface
marker
Check the
LAN con-
nection
and, if ne-
cessary,
the LAN
elements
(hub,
switch).
222 ETHERNET LINK IN SERVICE Board lo-
cation.
Ethernet
interface
marker.
TYPE MESSAGE LOCA-
TION
ADDITIONAL INFORMATION ACTION

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing