6.9 Measuring Waveform
6-93
6
How to Operate Sampling Scope
Figure 6.9.1.2-4 Rate Tab Settings
10. Click Time.
11. Set Precision Trigger when needed.
12. Click Auto Scale.
If the scales are not set properly, set the value for Divide Ratio, and
then click Acquire Clock Rate. In Coherent Eye or Pulse mode, only
the following values can be set for Divide Ratio:
1/2, 1/4, 1/8, 1/16, 1/32, 1/40, 1/48, or 1/64
Figure 6.9.1.2-5 Amplitude/Time Tab Settings
13. Click Measure.
10 12
11
13
14
15
16
To Next Page
Loading...
