Arkray ADAMS A1c User Manual

Chapter 1 Before Use
HA-8190V 1-4
 On-the-spot STAT measurement
A port specifically for STAT measurements is provided. So normal measurements can be interrupted to measure one
specific sample. STAT measurement can also be performed while the standby screen is displayed.
 Fluid level detection sensor to prevent reagent shortages during measurement
Reagent levels are measured and, if low levels are detected, messages are displayed to notify the user. Measurement
continues until a reagent is used up, at which point measurement automatically stops.
 Two-way online communications
An ordering system using barcodes of sample IDs can be built by connecting to a host terminal.
 Timer-triggered automatic starting/shutdown
Startup times can be set for each day of the week. Sleep mode automatically activates if the standby screen appears for
a user-set amount of time.
 Wide array of options available
ARKRAY makes available a wide array of options including the hand-held barcode reader and the side sampler.

Arkray ADAMS A1c Specifications

General

Brand	Arkray
Model	ADAMS A1c
Category	Measuring Instruments
Language	English