Chapter 6 Appendix
HA-8190V 6-2
6.1 Printed Report Examples
This section gives you examples of printed reports on the instrument’s parameter settings and diagnosis results.
6.1.1 Current Parameter Settings
You can view the current parameter settings for timers, column pressure unit, the printer and others.
Example
REFERENCE:
Printing instructions: See “3.8.5. Printing the Current Parameter Settings” on page 3-31.
*** HA-8190V V01.00 ***
Parameter settings
10-01-2017 10:00
Serial No. 12345678
========================
Reagent information
Lot No. Expiry
Elu. A 7A1101 2018-01
Elu. B 7C1112 2018-03
Elu. CV 7D3331 2018-04
Wash H 6L1121 2017-12
Column 6F001V 2018-02
Calib(F) CA89C05 2018-05
Calib(V) CA89C05 2018-05
========================
Timer setup
Startup timer
[
Use
]
Monday
[
Not start up
] <00:00>
Tuesday
[
Not start up
] <00:00>
Wednesday
[
Not start up
] <00:00>
Thursday
[
Not start up
] <00:00>
Friday
[
Not start up
] <00:00>
Saturday
[
Not start up
] <00:00>
Sunday
[
Not start up
] <00:00>
Shutdown timer
<00:00>
========================
Measurement No. setup
Meas. start No. reset
[
Power ON
]
Measurement No. assignment
[
Sequential order
]
Startup timer: Settings for each day
Print date and time
Serial number of the instrument
Reagent information
Startup timer: Use/Not use
Shutdown timer setting
Measurement start number setting
Measurement number setting
To Next Page
Loading...
Need help?
General
