Arkray ADAMS A1c User Manual

Chapter 2 Measurement
HA-8190V 2-22
2.5.2 Measuring Samples
Once samples have been prepared, start measurements.
1 Set the measurement start number (if needed).
On the standby screen, check the measurement start number. Set a different number if necessary. If you do not change
the number, skip to step 2.
a On the standby screen, touch the <Start No.>.
b Touch the <Normal measurement samples>, and enter a new
measurement start number.
• Range: 0000 to 9999
c Touch .
• This saves your entry and will return you to the standby screen.
• The entered number will appear in <Start No.> on the standby
screen.
OK

Arkray ADAMS A1c Specifications

General

Brand	Arkray
Model	ADAMS A1c
Category	Measuring Instruments
Language	English