Chapter 3 Auxiliary Operations
HA-8190V 3-8
3.4 Functions Selected from the Main Menu
Touch on the standby screen to go to the [Main menu]
screen. On the [Main menu] screen, you can make instrument settings,
review measurement results and perform operations necessary for
maintenance tasks.
* Screen numbers are given in ( ).
[Calibration menu] screen (1000)
[Reagent replace menu] screen (2000)
Option Description Page
Fast&Var. calibration
(1100)
Enters the standard values of the standard solutions used to perform automatic
calibration for both the Fast and Variant modes at the same time. Select this
option when you want to set the values by entering numeric values instead of by
reading barcodes.
2-38
Fast calibration only
(1200)
Enters the standard values of the standard solutions used to perform automatic
calibration for the Fast mode. Select this option when you want to set the values
by entering numeric values instead of by reading barcodes.
Var. calibration only
(1300)
Enters the standard values of the standard solutions used to perform automatic
calibration for the Variant mode. Select this option when you want to set the
values by entering numeric values instead of by reading barcodes.
Calibration coefficients
setting (1400)
Sets coefficients “a” and “b” of the HbA1c correction formula, “Y=aX+b”, for the
Fast and Variant modes.
2-43
Option Description Page
Eluent A replacement
(2100)
Sets reagent information for a new pack of eluent A. After replacing the pack,
resets the remaining reagent graphic on the standby screen.
4-3
Eluent B replacement
(2200)
Sets reagent information for a new pack of eluent B. After replacing the pack,
resets the remaining reagent graphic on the standby screen.
Eluent CV
replacement (2300)
Sets reagent information for a new pack of eluent CV. After replacing the pack,
resets the remaining reagent graphic on the standby screen.
Hemol washing sol.
replacement (2400)
Sets reagent information for a new bottle of the hemolysis washing solution. After
replacing the bottle, resets the remaining reagent graphic on the standby screen.
4-7
Column replacement
(2500)
Sets reagent information for a new column. Displays instructions on how to
replace the column and resets the column counter.
4-11
Edit reagent/column
info.(2600)
Sets information on eluents, hemolysis washing solution, standard solutions and
columns.
3-42
Standby screen
[Main menu]
To Next Page
Loading...
Need help?
General
