Chapter 3 Auxiliary Operations
HA-8190V 3-16
3.5.3 Setting the HbA1c Measurement Conditions
Set HbA1c calibration conditions, HbA1c control measurement parameters, pressure unit for the column and error
trigger conditions.
a On the standby screen, touch , <3. Meas. condition menu> and <3. Meas. condition setup> in that order.
b Set the setup items.
• See the table on the next page.
c Touch .
• The message “Settings changed. Save setting changes?” will
appear.
d Touch .
• This saves your settings and will return you to the [Meas.
condition menu] screen.
e Touch to return to the standby screen.
REFERENCE:
To go to page 2/2:
Touch [].
OK
OK
To Next Page
Loading...
Need help?
General
