========================
Meas. condition setup
Ctrl expected value mmol/mol
L
< 0.0>
H
< 0.0>
Ctrl measurement count
[1]
Control error range (mmol/mol)
L
< 3>
H
< 4>
Action on control error
[
Stop measurement
]
Pressure unit
[kg/cm2]
STD. solution meas.
[3]
Calibration error range %
<3.0>
Replace column notification
[
ON
]
Calibration notification
[
ON
]
Misread barcodes
< 0>
No. of failed smpl tube spin
< 0>
Eluent CV pack
[
ELUENT 90CV (600mL)
]
========================
Language
[
English
]
========================
Printer setup
Use/Not use
[
Use
]
Peak information
[
Print
]
Chromatogram
[
Print
]
Data list
[
Not print
]
Reagent information
[
Not print
]
========================
External output setup
Use/Not use
[
Use
]
========================
Beeper/Display setup
Beeper volume setup
[5]
Display brightness setup
[5]
HbA1c calibration: Error detection range
Volume of the eluent CV pack
Language to be displayed and printed
Number of sample tube spin failures
at which measurement stops
Control measurement: Error detection range
HbA1c control measurement:
Number of measurements per sample container
Control expected values
Control measurement: Action in case of error
Pressure unit of the column
HbA1c calibration:
Number of measurements per sample container
Calibration notification: ON/OFF
Number of misread barcode errors
at which measurement stops
Printer: Use/Not use
Peak information:
Print/Not print in measurement result reports
Chromatogram:
Print/Not print in measurement result reports
Data list:
Print automatically after each batch/Not print
Reagent information:
Not print/Each batch/Each measurement
External output: Use/Not use
Beeper volume
Display brightness
Replace column notification: ON/OFF
To Next Page
Loading...
Need help?
General
