3.6 Measurement Results
HA-8190V 3-21
3.6.2 Reviewing Results
Measurement results stored in the memory can be reviewed on the display. You can choose to view all measurement
results in order or individual measurement results specified by type or number of the measurement. Peak information
and chromatograms for searched results can also be displayed. Sample IDs shown as a series of hyphens due to barcode
misread can be modified. Settings for accuracy control and control expected values can be made for individual control
measurement results.
Reviewing measurement results
a On the standby screen, touch , <4. Meas. result menu> and <4. View> in that order.
b Set the search conditions for the measurement results you want to
review.
• See steps c to e in “3.6.1. Printing/Transmitting Results” on
page 3-18.
c Touch .
• The oldest matching result will be displayed.
• To view other results, see the table below.
• The functions below can be used to view measurement results.
Total number of matching results
Serial number for the currently
displayed result
REFERENCE:
If “Not found” appears on the display:
No match is found in the memory. Touch to return to
the screen shown in step b.
OK
Button Description
Peak info. Displays the peak information.
Chromato Displays the chromatogram.
See “ Printing/transmitting results or setting sample information” on page 3-23.
Returns to the results of the previous sample.
Goes to the results of the next sample.
Goes to the main menu.
Function
Next
Go back
To Next Page
Loading...
Need help?
General
