HA-8190V 5-1
Chapter 5 Troubleshooting
This chapter describes actions you should take if warnings, errors or troubles
occur. It also describes what to do if eluent packs are attached to the wrong
nozzles or if the column tubes are damaged.
5.1 If a Warning Occurs ...................................................................................... 5-2
5.1.1. From Warning Occurrence to Remedy..............................................................5-2
5.1.2. Causes and Remedies ......................................................................................5-3
5.2 If an Error Occurs ....................................................................................... 5-10
5.2.1. From Error Occurrence to Remedy .................................................................5-10
5.2.2. Causes and Remedies ....................................................................................5-11
5.3 If Trouble Occurs ........................................................................................ 5-14
5.3.1. From Trouble Occurrence to Remedy.............................................................5-14
5.3.2. Causes and Remedies ....................................................................................5-15
5.4 Abnormal Result Messages ....................................................................... 5-22
5.5 If This Happens ........................................................................................... 5-25
5.5.1. If the Instrument Does Not Start Up (Replacing Fuses) ..................................5-25
5.5.2. Replacing the Column Tubes ..........................................................................5-27
5.5.3. Replacing the Tubes of the Drain Pinch Valves ..............................................5-34
5.5.4. If Eluent Packs Are Incorrectly Attached .........................................................5-37
To Next Page
Loading...
