AUBO i5 - Page 38

ROBOT INSTALLATION V4.3
Page 36
©2015-2018 AUBO.All rights reserved.
Figure 6.7 Pop window of changing installation position
Under this circumstance, please choose the correct option on the AUBOPE, otherwise, it may have
unpredictable movement in hand-guiding mode.
Make sure manipulator is installed correctly and safely
If the robot is submerged in water over an extended time, it might be damaged. The robot
should not be installed in water or in a wet environment unless it has IP67 protection class.
Tipping hazard. If the robot is not safely placed on a solid surface, the robot can fall over
and cause injury.