User's Manual 1018 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
CLI: configure voip > sbc routing
condition-table
[ConditionTable]
[ ConditionTable ]
FORMAT ConditionTable_Index = ConditionTable_Condition,
ConditionTable_Description;
[ \ConditionTable ]
For a detailed description of this table, see ''Configuring Message
Condition Rules'' on page 562.
SBC IP-to-IP Routing Table
Web: IP-to-IP Routing Table
EMS: IP to IP Routing
CLI: configure voip > sbc routing
ip2ip-routing
[IP2IPRouting]
This table parameter configures the SBC IP-to-IP Routing table
for routing incoming SIP messages such as INVITE messages to
an IP destination. The format of the ini file table parameter is as
follows:
[ IP2IPRouting ]
FORMAT IP2IPRouting_Index = IP2IPRouting_RouteName,
IP2IPRouting_SrcIPGroupID, IP2IPRouting_SrcUsernamePrefix,
IP2IPRouting_SrcHost, IP2IPRouting_DestUsernamePrefix,
IP2IPRouting_DestHost, IP2IPRouting_RequestType,
IP2IPRouting_MessageCondition,
IP2IPRouting_ReRouteIPGroupID, IP2IPRouting_Trigger,
IP2IPRouting_CallSetupRulesSetId, IP2IPRouting_DestType,
IP2IPRouting_DestIPGroupID, IP2IPRouting_DestSRDID,
IP2IPRouting_DestAddress, IP2IPRouting_DestPort,
IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions, IP2IPRouting_GroupPolicy,
IP2IPRouting_CostGroup;
[ \IP2IPRouting ]
For a detailed description of this table, see ''Configuring SBC IP-
to-IP Routing Rules'' on page 564.
SBC Alternative Routing Reasons Table
Web: SBC Alternative Routing
Reasons
EMS: Alternative Routing
Reasons
CLI: configure voip > sbc routing
sbc-alternative-routing-reasons
[SBCAlternativeRoutingReason
s]
This table parameter configures the SBC Alternative Routing
Reasons table. The format of the ini file table parameter is as
follows:
[ SBCAlternativeRoutingReasons ]
FORMAT SBCAlternativeRoutingReasons_Index =
SBCAlternativeRoutingReasons_ReleaseCause;
[ \SBCAlternativeRoutingReasons ]
For a detailed description of this table, see ''Configuring SIP
Response Codes for Alternative Routing Reasons'' on page 573.
IP to IP Inbound Manipulation Table
Web: IP to IP Inbound
Manipulation
EMS: IP to IP Inbound
Manipulation
CLI: configure voip > sbc
manipulations ip-inbound-
manipulation
[IPInboundManipulation]
This table parameter configures the IP to IP Inbound Manipulation
table. This table allows you to manipulate the SIP URI user part
(source and/or destination) of the inbound SIP dialog message.
The format of the ini file table parameter is as follows:
[IPInboundManipulation]
FORMAT IPInboundManipulation_Index =
IPInboundManipulation_ManipulationName
IPInboundManipulation_IsAdditionalManipulation,
IPInboundManipulation_ManipulatedURI,
IPInboundManipulation_ManipulationPurpose,
IPInboundManipulation_SrcIPGroupID,
IPInboundManipulation_SrcUsernamePrefix,
IPInboundManipulation_SrcHost,
To Next Page
Loading...
