User's Manual 482 Document #: LTRT-10466
Mediant 500L MSBR
Table 29-10: Charge Codes Table Parameter Descriptions
Parameter Description
End Time
CLI: end-time-<1-4>
[ChargeCode_EndTime<1-4>]
Defines the end of the time period in a 24 hour format, hh. For
example, "04" denotes 4 A.M.
Notes:
The first time period always starts at midnight (00).
It is mandatory that the last time period of each rule end at
midnight (00). This prevents undefined time frames in a
day.
Pulse Interval
CLI: pulse-interval-<1-4>
[ChargeCode_PulseInterval<1-4>]
Defines the time interval between pulses (in tenths of a
second).
Pulses On Answer
CLI: pulses-on-answer-<1-4>
[ChargeCode_PulsesOnAnswer<1-
4>]
Defines the number of pulses sent on answer.
29.18 Configuring Voice Mail
The Voice Mail Settings page allows you to configure the voice mail parameters. For a
description of these parameters, see ''Configuration Parameters Reference'' on page 779.
Notes:
• The Voice Mail Settings page is available only for FXO and CAS interfaces.
• For more information on configuring voice mail, refer to the CPE Configuration
Guide for Voice Mail User's Manual.
To configure the Voice Mail parameters:
1. Open the Voice Mail Settings page (Configuration tab > VoIP menu > GW and IP to
IP > Advanced Applications > Voice Mail Settings).
To Next Page
Loading...
