User's Manual 1. Overview
Version 6.8 25 Mediant 500L MSBR
1 Overview
The Mediant 500L Multi-Service Business Router (MSBR), hereafter referred to as device,
is an all-in-one router combining access, data, voice and security in a single device. The
device is suited for managed data, SIP trunking, hosted PBX and cloud-based services,
and allows service providers to deploy flexible and cost-effective solutions.
The device combines multiple service functions such as a Media Gateway, Session Border
Controller (SBC), Data Router and Firewall, LAN switch, and WAN access. The device
offers enhanced dialing plans and voice routing capabilities along with SIP-to-SIP
mediation, allowing enterprises to implement SIP Trunking services (IP-to-IP call routing)
and IP-based Unified Communications, as well as flexible PSTN and legacy PBX
connectivity.
The device is designed as a secured Voice-over-IP (VoIP) and data platform. Enhanced
media gateway security features include, for example, SRTP for media, TLS for SIP
control, and IPSec for management. Data security functions include integrated Stateful
Firewall, IDS/IPS, SSL for remote user access, and site-to-site VPN. A fully featured
enterprise class SBC provides a secured voice network deployment based on a Back-to-
Back User Agent (B2BUA) implementation.
The device offers call "survivability" solutions, ensuring service continuity to enterprises
served by a centralized SIP-based IP-Centrex server or branch offices of distributed
enterprises. Call survivability enables internal office communication between SIP clients in
the case of disconnection from the centralized SIP IP-Centrex server or IP-PBX.
This is an ideal solution for small office-home office (SOHO) / small and medium-sized
businesses (SMB), supporting the following (depending on ordered configuration):
Multiple WAN interfaces for (WAN redundancy):
• Single Gigabit Ethernet copper (10/100/1000Base-T) unshielded twisted pair
(UTP) interface port
• Dual-mode of 1.25 Gbps Optical Fiber Small Form-Factor Pluggable (SFP)
• ADSL2+ / VDSL2
• 3G Cellular WAN access (primary or backup), using a USB modem
Four Fast Ethernet (10/100Base-T) LAN ports
USB port for optional USB storage services and 3G cellular WAN modem
Optional PSTN telephony interfaces:
• Up to four FXS port interfaces
• Up to four FXO port interfaces
• Two ISDN BRI port interfaces, supporting up to four voice channels as well as
PSTN fallback
Wireless LAN 802.11n/b/g (Wi-Fi) access point, providing two integrated, multiple-
input and multiple-output (MIMO) 2Tx/2Rx antennas operating in the 2.4 GHz
frequency range
Serial console port (RJ-45) for device management
The device allows full management through its command line interface (CLI) as well as its
HTTP/S-based embedded Web server. The user-friendly Web interface allows remote
configuration using any standard Web browser (such as Microsoft™ Internet Explorer™).
Note: For maximum call capacity figures, see ''SBC and DSP Channel Capacity'' on
page 1035.