AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 1033 Mediant 500L MSBR
Parameter Description
Web: Cost Group > Time
Band Table
EMS: Time Band
Provisioning > Time Band
CLI: configure voip >
services least-cost-routing
cost-group-time-bands
[CostGroupTimebands]
This table parameter configures time bands and associates them with
Cost Groups.
[CostGroupTimebands]
FORMAT CostGroupTimebands_TimebandIndex =
CostGroupTimebands_StartTime, CostGroupTimebands_EndTime,
CostGroupTimebands_ConnectionCost,
CostGroupTimebands_MinuteCost;
[\CostGroupTimebands]
Note: For a detailed description of this table, see ''Configuring Time
Bands for Cost Groups'' on page 254.
67.14.4 Call Setup Rules Parameters
The Call Setup Rules parameters are described in the table below.
Table 67-78: Call Setup Rules Parameters
Parameter Description
Web: Call Setup Rules
CLI: configure voip/services
call-setup-rules
[CallSetupRules]
This table parameter defines Call Setup Rules that the device runs at
call setup for LDAP-based routing and other advanced routing logic
requirements including manipulation.
[ CallSetupRules ]
FORMAT CallSetupRules_Index = CallSetupRules_RulesSetID,
CallSetupRules_AttributesToQuery, CallSetupRules_AttributesToGet,
CallSetupRules_RowRole, CallSetupRules_Condition,
CallSetupRules_ActionSubject, CallSetupRules_ActionType,
CallSetupRules_ActionValue;
[ \CallSetupRules ]
Note: For a detailed description of this table, see ''Configuring Call
Setup Rules'' on page 256.