User's Manual 610 Document #: LTRT-10466
Mediant 500L MSBR
43.2 Restarting a B-Channel
You can restart a specific B-channel belonging to an ISDN or CAS trunk, using the SNMP
MIB variable, acTrunkISDNCommonRestartBChannel or the EMS management tool (refer
to the EMS User's Manual). This may be useful, for example, for troubleshooting specific
voice channels.
Notes:
• If a voice call is currently in progress on the B-channel, it is disconnected when the
B-channel is restarted.
• B-channel restart can only be done if the D-channel of the trunk to which it
belongs is synchronized (Layer 2).
• B-channel restart does not affect the B-channel's configuration.
To Next Page
Loading...
